Adobe Flash Player not installed or older than 9.0.115!

BlueSky Top Plates and Adapters fit on the very top of our Mast Systems and are designed to accommodate a wide range of applications & devices such as wind turbines, solar panels, cameras, and directional antennas.   The simple push pin design eliminates the need for tools in the field reducing deployment complexity and increasing operational tempo.  We have a wide selection of standard Top  Plates and Adapters as well as an in-house team that can quickly design and prototype a custom solution for your specific application if required.

Compatibility:  AL1 and AL2 Standard and Lift Series Mast Systems

      Custom Adapters and Brackets Available, See Design Services

Available for use with the BlueSky Series II Mast - AL1 and AL2 - Standard and Lift Series. The BlueSky Universal Pole Mount can be mounted anywhere on a center mast pole and is dual sided allowing for the attachment of Universal Brackets on either or both sides. The Universal Articulating Arm Brackets has 7 angles of articulation and can have 5 different length arms attached and secured with a push pin and turn knobs. The Universal Tilt Bracket has 120 degrees of rotation and is designed to be fit with either a bracket or a plate allowing for further control.

Available for use with the BlueSky Series II Mast - AL1 and AL2 - Standard and Lift Series. BlueSky Pole Mount Side Arm Kits come in both Single and Dual configurations and are used for mounting multiple devices anywhere on the BlueSky Mast System. The Kits can be attached at any point along the center mast and even stacked for applications that require vertical separation between devices. Each  Kit features removable arms available in 5 different lengths, Dual Turn Knobs for fail-safe performance and a large selection of optional quick connect Side Arm Mounts.

Available for use with the BlueSky Series II Mast - AL2 - Roller Series. BlueSky Roller Side Arm Kits attach to any of the 4 mounting positions on the BlueSky Roller. Each Kit the features the Universal Articulating Arm Bracket which has 7 angles of articulation, removable arms available in 5 different lengths, Dual Turn Knobs for fail-safe performance and a large selection of optional quick connect Side Mounts.

Available for use with BlueSky Universal Pole Kits and Winch Roller Kits. Quick Connect Side Mounts allow a wide variety of different devices to be deployed on the ends of the removable arms that come standard with our Universal Pole Kits and Winch Roller Kits. Each Side Mount is designed to easily attach to the removable arms using a Stainless Steel Push Pin that makes for quick and easy deployment without the need for any field tools.

      Custom Adapters and Brackets Available, See Design Services

The BlueSky Mast Surface Wire Ground Kit was developed in order to provide a field expedient solution to grounding that could be easily deployed multiple times without sacrificing any degradation in performance.  The Surface Wire Ground Kit can be easily deployed in areas where ground conditions do not permit the use of ground rods and still provide “a lower resistance ground than the 6-foot ground rod."

We also provide Grounding Brackets and Air Terminals for Lightning Protection Applications.

Download The Full Test Report Here, OFFICIAL REPORT

BlueSky offers different tripod base plates and accessories for deploying the system on rooftops and urban environments where staking the tripod to the ground to secure it may not be possible.

Custom Accessories Available, See Design Services

Specialty Items are available to customize the use of the BlueSky Mast to your needs. Items like the Lift Handles, which can be used by a single person to help lift heavy loads on the mast. The BlueSky Lift Kit, which takes the AL2 Standard Series and upgrades it to an AL2 Lift Series, allowing to more quickly and easily deploy your devices using less man power. We also have customizable plates, brackets and mounts created specifically with your needs in mind.

BlueSky offers both the Primary and Secondary Guy Kits feature free spinning guy rings that allow the mast to be rotated from the bottom even when guyed providing directional control. Non-stretch, UV resistant Guy Ropes and our self tensioning guy handles for easy adjustment and feature custom blackened stainless steel snap hooks for attaching to stakes and guy rings.

All BlueSky Mast Systems 7 Meters and above come standard with Primary Guy Kits and all BlueSky Mast Systems 11 Meters and above come standard with both Primary Guy Kit and Secondary Guy Kit (optional use, not required).

BlueSky offers different stake kits and accessories for deploying the system in various kinds of soil conditions. We use Stainless Steel and Aluminum Base Plate Stakes, Galvanized Steel Guy Stakes and Aluminum Snow Stakes.

Click to view our entire selection of individual parts for our mast systems and accessories.

Here you will find a complete list of BlueSky Masts, Accessories and Parts. Our Masts are labled by category, Standard Series, Lift Series featuring the Lift Kit, and the Roller Series, featuring the winch and roller. Accessories including Top Plates & Adaptors, Universal Pole Mount & Brackets, Side Arm Kits, Side Arm Mounts, Grounding Equipment, Rooftop Supports, Guying & Stake Kits and Specialty Items.